Bonding layer used for treating rough concrete surfaces for inside and outside bends!
TECHNICAL CHARACTERISTICS • It is a liquid material based on acrylic resin, used for the treatment of smooth concrete surfaces. • Provides a very good bond between concrete and filler layers such as mortar, grout, putty, waterproofing, etc. • The use of this material eliminates the need to use cement plaster on smooth concrete surfaces. • Surface treatment with BETON CONTACT ensures a fairly good workability as well as obvious ease in the application of other layers. FIELD OF USE It is used for the treatment of smooth concrete surfaces. It is used as an insulator, fixing surfaces that will then be painted or covered with other layers such as mortar, grout, etc. HOW TO APPLY THE PRODUCT The product is applied by brush or roller uniformly over the entire surface. You must wait at least 12 hours for BETON CONTACT to dry depending on the temperature before applying the next product on the substrate. Low temperatures as well as the presence of moisture significantly increase the drying time. It should not be applied when the substrate has a temperature lower than +5oC and we must make sure that up to 24 hours after application it will not get wet.
