Facade base for exterior and interior use.
Technical characteristics:
• It is a liquid material based on acrylic resin, resistant to alkalis.
• Treating surfaces with Acrylic Plaster provides good workability and noticeable ease in working with decorative layers.
• It creates insulation and a very good bond with surfaces treated with the decorative layer.
• It is a ready-to-use white primer.
• All technical characteristics of decorative coatings to be used are closely related to the properties of the primer that will be applied beforehand.
• Acrylic Plaster significantly reduces the absorbency of the surface towards water.
• It standardizes the level of absorbency of the surface to be applied to.
Preparation of the product:
After manual stirring in a bucket, the product is ready for use. It can be thinned with water up to 10%.
Application method:
The product is applied uniformly to the entire surface with a brush or roller. You should wait at least 12 hours for Acrylic Plaster to dry (depending on the temperature) before applying the finishing product on the support. Low temperatures and high humidity significantly increase the drying time of the product. It should not be applied at temperatures lower than +5°C and higher than +35°C.
